Victor Mendes: Architectural Design 1 

Project 01: Fibonacci Cube

this is a fibonacci spiral, which follows the rules of the fibonacci sequence which is adding the sum of two previous numbers to get the sum of a new one 
Pictureperspective drawing
here you see my perspective drawing, we are  looking at the front right side of the model. I drew this by firstly making a grid underneath  the drawing to measure my model correctly, the I made a line in the center of my page and that  would be my perspective line, then using that I  was able to tell where all the angles would be.
Picture
fibonacci cube
This is my fibonacci cube, this was made using three planes that I constructed using cardboard, after that I made six mor planes out of cardboard and added basswood planes to it to emphasize spaces that look the most visually pleasing or interesting.

Project 02: Border Tower

PictureBorder Research
Our border tower project started with research. This is what I came up with about our Borders. As you can see it is heavily militarized on the ground, but not so much on the sky.
PictureFloor Plan
This is my Floor Plan and it shows the two habitable floors of my tower.
PictureElevation/Section
This is my Elevation/Section, the first four sides is my tower from all side views and the fifth one is my front view (first) if you were to cut it down the middle.
Picture3D Model 01
Here is a model of my two towers in sketchup  facing each other.
Picture3D model 02
This is another view of my two models, this time they are projected parallel to the camera making them appear flat giving you a better view on how the two towers look.